Translate a ZMK

Command:

Translate a ZMK encrypted under the LMK pair held in “key change storage” to encryption under LMK pair 04-05.

Note:

If a 32-character ZMK is required, the HSM must be configured for double-length ZMKs using the CS (Configure Security) console command.

Field

Length & Type

Details

COMMAND MESSAGE

Message header

m A

(Subsequently returned to the Host unchanged).

Command code

2 A

Value GE.

ZMK

16H or 32H or
1A+32H or 1A+48H

The ZMK encrypted under the LMK pair held in “key change storage”.

Delimiter

1 A

Optional. If present the following three fields must be present.  Value “;”.

If an option is not required by the command fill with a valid value or 0.

Reserved

1 A

Optional. If present must be 0.

Reserved

1 A

Optional. If present must be 0.

Key check value type

1 A

Optional. Key check value calculation method

0 - KCV backwards compatible.

1 - KCV 6H.

End message delimiter

1 C

Optional. Must be present if a message trailer is present. Value X’19.

Message trailer

n A

Optional. Maximum length 32 characters.

RESPONSE MESSAGE

Message header

m A

Returned to the Host unchanged.

Response code

2 A

Value GF.

Error code

2 N

00 : No errors

10 : ZMK parity error

12 : No keys loaded in user storage

13 : LMK error; report to supervisor

15 : Error in input data

21 : Invalid user storage index

ZMK

16H or 32H or
1A+32H or 1A+48H

The ZMK translated to encryption under LMK pair 04-05.

End message delimiter

1 C

Present only if present in the command message. Value X’19.

Message trailer

n A

Present only if present in the command message. Maximum length 32 characters.